C-G22 FUEL DISPENSER

C-G22 FUEL DISPENSER

Pump Type: Optional

Inlet Pressure: >=54kPa.

Flow rate (L/min.): 55±5

Suction Distance (m): 6(verticalmente) / 50(orizzontalmente)

FlowMeter Type: Optional

Accuracy: ±0.2%

Motor Voltage(V): 110V/220V/380V,50Hz/60Hz

Capacity(hp): 1HP(0.75kw)

Input Voltage: 110V/220V/380V,50Hz/60Hz

Nozzle: Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type Solenold Vale Control Type

Preset Function: Provided(Small LCDIndicator)

Display(Counter): Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount: 0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price: 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Optional Display Type: LCD and Bright Backlight

Digit of Volume: 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount: 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price: 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range: 0~~99,999,999,99

Totalizer:1~~9,999,999

Hose:4.5m

Weight: 220kg

Dimension(L×W×H): 1100*525*2170(mm)

Dimension(L×W×H)Of Qty of Container: 40ft: 44 20ft: 22

motor and solenoid valve, with larger power. it also have the type of double-nozzle fuel dispenser mounted with total two sets of system, however, most manufacturers don’t install this type in order to reduce cost. With more than four nozzles, this fuel dispenser is able to be regarded as multi-nozzle type. At recent, most of multi-nozzle fuel dispensers made by domestic manufacturers are rebuilt from double fuel dispenser, which actually mounted fuel dispenser two pieces of double fuel dispensers to one frame, in the same way 3 piece to six-nozzle. Therefore, learning the structure of double fuel dispenser is able to know multi-nozzle type. Here main introduce the double-nozzle fuel dispenser. Measuring main board is the core in fuel dispenser’s electric control system, which is reason why some people called this kind as ‘computer fuel dispenser� These operation including starting or stop, calculation, count, data generation and dialogue with machine also are conducted under the control of measuring main board. Display screen, keyboard and fuel dispenser’s switch are the main interface between operator and machine. The staff’s control command to fuel dispenser is mainly conducted through keyboard and nozzle switch, but report information and data are showed in display screen. The function of flow pulse converter, widely called as sensor, is to convert influx into electric pulse so that measuring main board process data. Motor is momentum of rotation of pump; solenoid valve used for pre fuel dispenser setting filling; power supply board is resource of electric system, which is used for converting alternative current into stable and clean directive current fuel dispenser needed. 2. Parts structure 2.1 Main board structure Measuring CPU: a core of fuel dispenser, responsible for obtaining operation information ---- lift up or put down nozzle, starting or sto fuel dispenser pping motor and solenoid valve through control circuit (small flow is open before large flow in starting process, vice versa in stopping process ), collecting fl

course of a transactions and response time　　 is 1 second.　　 3) Multi nozzle flow control produces no change in dispenser state.　　 MANUFACTURER OIL COMPANY SPECIFIC　　 200　　 to Free to the manufacturer oil company　　 255　　FP31_2.23 IFSF - STANDARD FORECOURT PROTOCOL March 2006　　 DISPENSER APPLICATION　　Page: 112　　 fuel dispenser 3.8 Logical Nozzle Data　　This data allows the CD to configure and control the logical nozzle at a FP.　　The access to the logical nozzle data is done by the database address FP_ID (fuelling point　　identification) + LN_ID (logical nozzle identification).　　The LN_ID = 10H is used to ask for all logical nozzle at a fuelling point.　　Please note that to allow dispensers to operate in stand alone mode the dispenser must have　　default settings for some of the Data_Id s contained in this database. I.e. the dispenser must　　configure these Data_Id s itself after a master resetcold start.　　 LOGICAL NOZZLE DATABASE　　 DB_Ad = FP_ID (21H-24H) + LN_ID (11H-18H)　　 Data Field Type ReadWrite MO　　 Data Element Name　　 Description　　 _Id (Value) in State　　 CONFIGURATION　　 1 fuel dispenser Bin8 R(1-9) M　　 PR_Id　　 (01H) (1-8) W(1-2)　　 Identifier of the product dispensed by this logical nozzle.　　 The PR_Id (value 1-8) specifies the product the product　　 fuel dispenser which is stored in the Product Database PR_ID (address　　 41H-48H).　　

Emerging-Market Indicators Overview Europe Turkey fuel dispenser Serbia and Kosovo Economy A province prepares to depart Financial markets Ethnic groups in Kosovo The minorities within the minority Ukraine s politics Up for grabs Italy s government Tantalising French riots One year on The European Commission Musical chairs Charlemagne Mediterranean rivals fuel dispenser Britain Interest rates Tethering inflation London property Gazumped Iraq Bad timing Transpo fuel dispenser rt Stuck in a tunnel Rural post offices Cheques in the post