HONGYANG GROUP French Southern Territories Technical Center

Fax: +86 (577)88097280

HONGYANG Group logo

HONGYANG GROUP French Southern Territories Technical Center , Discuss Technical Problem , Suply After Service Online of Fuel Dispenser, Please Regist Firstly

C-GA FUEL DISPENSER

C-GA

C-GA FUEL DISPENSER

Pump Type: Optional

Inlet Pressure : >=54kPa.

Flow rate (L/min.): 55±5

Suction Distance (m) :6(verticalmente) / 50(orizzontalmente)

FlowMeter Type : Optional

Accuracy :±0.2%

Motor Voltage(V): 110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle: Auto Shut-off Nozzle

Environmental Condition :-40~~+55degree

Control Type : Solenold Vale Control Type

Preset: Function Provided(Small LCDIndicator)

Display(Counter):Type LCD and Bright Backlight

Digit of Volume: 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range: 0~~99,999,999,99

Optional Display: Type LCD and Bright Backlight

Digit of Volume: 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount: 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price :0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range: 0~~99,999,999,99

Totalizer:1~~9,999,999

Hose: 4.5m

Weight : 255kg

Dimension(L×W×H): 1100*525*2170(mm)

Dimension(L×W×H)Of Qty of Container: 40ft: 44 20ft: 22

products links

links

technical archives

    wing measuring requirements: Instrument of measurement should have a certain tension and not easily be deformed so as to affect the inner cubage volume. Foam and vapor that dissolved in fuel measured are able to be discharged completely when pouring into instrument of measurement. Liquid measured should be discharged after measurement, only a bit being left in container. Valve of instrument of measurement should have reliable sealability without leakage phenomenon as being full of oil. Indicating pipe on measurer should be made of glass without defect on inner diameter so as to hinder observation. Connection between measuring neck and scale should be fixed in order to keep stably relative position. The line on indicating glass should be legible and clear, width being no more than 0.25mm. The inner of measuring neck is depended upon measurer’s accuracy. As for Class fuel dispenser II metal standard measurer, the ratio of corresponding liquid volume of per millimeter to measurable volume of measurer is no more than 5×10�. Discharge time of measurer relies on the diameter of bottom valve. It is leaned from experiment that the longer time of unload the less residual liquid left, better promoting measurement accuracy, and vice versa. Thereby, in order to control the tolerance occurred by discharge velocity and time and residual vo fuel dispenser lume during approval progress, discharge condition and pouring-out time is regulated generally that opening fully bottom valve start to count two minutes from liquid dropping, then close bottom valve; or fully open bottom valve and close it after 3 minutes. Indicated value generally read out as showed at the bottom of curve in indicating glass. Apart from standard measurer applie fuel dispenser d in fuel dispenser inspection and approval, there is thermometer or temperature sensor, measured range �0�to �0� minimum value 0.2� which used to measure temperatures of liquid that passed over nozzle vent and in standard measurer. One of purpose to measure temperature is to make modification of

technical specification

    ils to print. Cashier performs any attempt to fix it: if   successful the transaction completes successfully.  9. If the printer is not available EPS fails to print. Cashier performs any attempt to fix it: if not   successful the transaction aborts and reverse or not according to EPS rule for the card (e.g.   customer decision).  10. If EPS gets into an exception status transaction not possible to complete EPS tells POS   that redemption was not ok. POS is still at the initial status and cashier selects another   method of payment.  11. If POS fails to receive a response from EPS (EPS failure) the cashier will act a procedure   on the POS and if the loyalty receipt was printed and was ok the redemption is valid anyway.   POS prints sales receipt. Cashier gives Customer EFT Ticket and Sales receipt. Otherwise the   redemption fuel dispenser is considered not ok the POS is still at the initial status and cashier selects another   method of payment.  12. If EPS tells POS the redemption response but POS has failed (e.g. fails to get the   acknowledge). The redemption is valid. The cashier acts an exception procedure tries to   recover the POS andor gives the customer a sales receipt for the redemption. The cashier   manages the tender of the money payment if necessar fuel dispenser y.  13. If authorisation ok EPS tells POS that redemption was ok. POS manages the tender of the   money payment if necessary. POS prints sales receipt (if necessary). Cashier gives Customer   loyalty Ticket and Sales receipt..  14. If authorisation ko EPS tells POS that redemption was not ok. POS is still at the initial   status and cashier selects another metho fuel dispenser d of payment.  The redemption is the same of a payment with card; the same way is managed the reversal or the refund  (when allowed). It is possible that the answer on a successful redemption might involve different pricing or  discounts.  The redemption might

we are committed to create the best workplace, encourage our staffs to put their own personalities into their jobs, and provide them a stage to show themselves.

    as one of the first to exercise diplomacy with communist China, acquired good relations with the Bandung nations, and, during the Malay guerrilla war, it became the first power to use a campaign of “hearts and minds�to fight an insurrection. Harold Macmillan s “winds of change�demonstrated that a lot was learned from the lesson of Suez. Tze Shiung Ng Kuala Lumpur SIR �Research suggests that the Russian vote at the UN in favour of the ceasefire resolution proposed by the United States on November 2nd 1956 was in no way related to supporting the initiative. Instead, it was part of a Soviet strategy to engage the UN and distract opinion from the Hungarian uprising, which was brutally crushed just two days later. Eugene Siklos Toronto SIR �The UN took up a Canadian “suggestion�to send an international emergency force to the canal to monitor a ceasefire? fuel dispenser The Canadian who made that suggestion, Lester Pearson, won the 1957 Nobel peace prize for his efforts and went on to become a brilliant prime minister. R.M. Burns Surrey, Canada An overstated fact SIR �Your article on citizenship in Canada stated that all Canadians “either came from somewhere else or are descendants of someone who did�(“I m a lumberjack, and you re not� August 5th). Good lord, I am in my 70s and my four grandparents wer fuel dispenser e born here. How many years does it take to be recognised as a native of one s country of birth? George Parslow Victoria, Canada Like, duh SIR �David Legard used sarcasm to criticise The Economist for employing a popular phrase (“it s sooo yesterday� that flummoxed his language students (Letters, August 5th). But if he really does “appreciate excellent written Englis fuel dispenser h� how can he not appreciate your use of humour? English constantly evolves and to anyone who thinks the language should be preserved in a state of petrified perfection I say it ain t gonna happen, dude. Colin Webb Perth, Australia © 2006 .