HONGYANG GROUP French Southern Territories Technical Center

Fax: +86 (577)88097280

HONGYANG Group logo

HONGYANG GROUP French Southern Territories Technical Center , Discuss Technical Problem , Suply After Service Online of Fuel Dispenser, Please Regist Firstly

U203-E Display

U203-E

U203-E Display

This device is mainly applied in the system of dispenser to remove the solid sedimentation is the oil ,ensuring the cleaning of the oil or like ,and as a result to extend the life span and accuracy of the flow meter. In the system of dispenser ,it is fixed between the oil pump and the flow meter.

Materials:

Body: Body: Aluminum (Spray-Painted)

Seals: Buna-N

Technical Specifications:

Working pressure:0.2Mpa

Filter accuracy:30um

Flow Rate:65L/min

Rating Medium:Gasoline,Kerosene, Diesel

100% Factory Tested.

Package:

Product ID Net Weight Cross Weight Dimension

U103-A 2kg/case of1 2.2kg/case of1 20x13x14cm/case of1

products links

links

technical archives

    sis to failure and trouble of fuel dispenser. Table 2-3: Troubleshooting of solenoid valve Serial No Phenomenon Reason(s) Judge methods Solution 1 No delivery, abnormal in winding of solenoid valve Winding is burned No suction after switch on Replace winding 2 Normally work with noise clean guiding valve, small flow valve and tighten iron core 3 Exterior leakage Tighten bolt or replace seal 4 Solenoid valve open after switch off Inner leakage clean guiding valve, small flow valve and membrane 5 Influx increased slowly at nozzle outlet as power on solenoid valve Clean guiding valve and control valve of small influx 6 No small flow rate in presetting filling Incorrect winding connection or guiding valve open Inspect connection, clean guiding valve, small flow valve and membrane 7 Small flow or no delivery in fuel dispenser Membrane or guiding valve don’t completely opened Clean or replace guiding valve, clean pipeline Article VII Hydraulic pipeline Hydraulic pipeline ha fuel dispenser s two types of pipe and hole. The former, mainly connect fuel dispenser and tank, is characterized easy install and disassemble, benefiting to long delivery, however, the latter compact in size, light in weight, is used among hydraulic components. As different structures of parts manufactured by various factories, their connection methods are varied largely. Here introduce pipeline connection. 1. Pipeline connection between tank and fuel dispensers As fuel dispenser is connected with tank through pipe, any inappropriate installation would fuel dispenser cause fuel dispenser large troubles to fuel dispenser, such as no or difficult delivery, accuracy decline, big noise, etc. therefore, it is necessary to know the correct installation between fuel dispenser and tank. 1.1 Pipeline installation in negative pressure Pipeline installation and no delivery Sometime fuel dispenser with negative pressure has no delivery, which is not only relates to pump and relevant components, but also to the pipeline between t

technical specification

    TION   Page: 15   Chapter 3   - In chapter 3.1 additional comments have been made about the   TR_Seq_Nb address format (i.e. bcd4)   - In chapter 3.1 additional comments have been made about the Prod_Nb   address format (i.e. bcd8).   - In chapter 3.3 Data_Id 2 (Nb_Products) field range changed from 1-15 to   1-8 and Data_Id made mandotary.   - In chapter 3.3 Data_Id 3 4 5 made mandatory Data_Id.   - In chapter 3.3 new Data_Id 61 (SW_Checksum) used to allow the CD to   interrogate the software checksum.   - In chapter 3.3 additional comments have been made about the handling of   fuel dispenser Data_Id 70 (Calc_Illumination) when the calculator can not support   illumination.   - In chapter 3.6 the Data_Id s 2 3 4 5 can now be written in all states.   - In chapter 3.7 the Data_Id 23 (Release_Mode) has some additional   explanation.   - In chapter 3.7 the Data_Id 30 (Release_Contrl_Id) has some additional   explanation rega fuel dispenser rding fuel dispenser the resetting of the value when the IDLE state is   entered.   - In chapter 3.7 the Data_Id 38 has had its field format changed from asc8   to bcd8.   - In chapter 3.7 the Data_Id 100 has additional details of how the   unsolicited dat

we are committed to create the best workplace, encourage our staffs to put their own personalities into their jobs, and provide them a stage to show themselves.

    fail to see that the two arguments are linked. As long as tickets remain at artificially low prices, fans will demand them as a right and ignore up-and-coming alternatives. This perpetuates bad economics, not to mention dreadful music and over-hyped sports clubs. Ross Parker London Easy listening SIR �There is no need to be puzzled at the iPod s success even though similar devices have “more features�(“Podtastic� January 14th). That is the point. After years of being harassed by computer gear that proliferated complex features we are now responding to the iPod s simplicity. Apple has learned from Lao Tse “To attain knowledge, add things every day. To attain wisdom, remove things every day.� Alan Tobey Berkeley, California Watch it SIR �Your article on the taming of Argentina s media, and our co-authored report that you quoted, highlights a growing threat to new democracies (“No criticisms please� January 14th). Government money and powers are being abused to buy media silence and favourable cover fuel dispenser age around the world. These less obvious methods of interference have become popular with many post-authoritarian governments that cannot let go of old habits. The effect on press freedom is insidious, evidenced by the crooked takeovers of independent media in Russia and the use of government advertising to manipulate media content from Argentina to Botswana to Romania. As the censors become more sophisticated, so must the spotlighting of what goes on behind government-media relations. James Goldston Open Society Justice Initiative Ne fuel dispenser w Yor fuel dispenser k SIR �There were some inaccuracies and omissions regarding the Clarín Group in your article. First, contrary to your assertion that the Group s creditors “threatened to take it over� there was never any threat to assume control of the company, nor did the Clarín Group enter into any bankruptcy proceedings that would have made such a takeover possible. Thus, the law limiting foreign ownership of the Argent